Manufacture
Turbine, tower and blades
We manufacture turbines to the wind class of the site and the power you need.
Manufacture, installation and service
Wind power
plants.
We manufacture the turbines that turn wind into electricity, install them from foundation to blade and service them for as long as they turn.
- Scale
- Facility and field
- Service model
- Turnkey
- Technical service
- 24/7
Why 1XVOLD
Every turn is a kilowatt hour not drawn from the grid. We manufacture the turbine, install it and stay with you for as long as it turns.
From wind measurement to foundation, from tower to blade, one team runs the whole process.
After commissioning, remote monitoring, scheduled maintenance and fault response stay with us too.
Service model
We manufacture, install
and stay with you.
We manufacture the turbine, install it on your site and service it for its whole life; one team from start to finish.
Installation
Turnkey installation
Wind measurement, foundation, tower erection, grid connection and commissioning from a single source.
Service
Maintenance and monitoring
Scheduled maintenance, remote monitoring and 24/7 fault response keep the turbine turning.
Application types
On every site
the wind blows.
Facility scaleFactory, farm, business
Facilityself consumption
A turbine beside the facility generates energy where it is consumed.
- Small and medium power turbines
- Installation in a tight footprint
- Low noise and vibration
Field scaleOpen land
Fieldhigh capacity
High capacity generation on windy sites with a tall tower and a wide rotor.
- Wind measurement and turbine siting
- Foundation, tower and crane plan
- Transformer and grid connection
HybridWind and solar
Hybridnight and day
Wind and solar share one connection; generation spreads across every hour of the day and the year.
- Shared infrastructure with a solar plant
- Ready for battery storage
- One monitoring and management screen
Technical specifications
The turbine
in numbers.
Values show a reference configuration and are tailored per project.
| Rotor | Horizontal axis, three blades |
|---|---|
| Blade | Glass fibre reinforced composite |
| Cut in speed | 3 m/s |
| Rated wind speed | 11 to 13 m/s |
| Cut out speed | 25 m/s |
| Blade angle | Pitch controlled |
| Direction control | Active yaw |
| Operating temperature | −20 to +40 °C |
| Installed power | From facility scale to MW class |
|---|---|
| Tower | Tubular steel |
| Grid | Grid connected or hybrid |
| Storage | Ready for battery integration |
| Monitoring | Remote monitoring and generation reports |
| Maintenance | Periodic maintenance and condition monitoring |
Where it is used
Wherever
there is wind.
The turbine is chosen from the site's wind measurement and the facility's consumption profile.
- Industrial sites
- Organised industrial zones
- Farms and agricultural businesses
- Ports and logistics areas
- Coastal and high altitude sites
- Municipalities and public bodies
- Hybrid plants
- Charging station sites
Installation process
From measurement
to the first turn.
Wind measurement
Wind speed and direction on site are measured and assessed.
Feasibility
Generation estimate and payback period are calculated.
Engineering
Turbine siting, foundation and electrical designs are prepared.
Manufacture
Turbine, tower and blades are manufactured to the design.
Erection
The foundation is poured, the tower raised and the rotor lifted into place.
Commissioning
The grid connection is made; remote monitoring and service begin.
Contact
Let us connect
your energy.
Get in touch about your solar or wind plant, EV charging station or mobile charging unit project and we will design the right solution together.